|
Image129
heres the light thats was just flashing on and off, i forgot to get a shot of the wiring job but some guy had just twitched the wires together by had without even taping it up little own doing it properly, but yea chucked some of those double crimps on it then tryd the brakes again but no, no go
Date: 01/07/09
Owner: Flannel HZ Flynn Dew
Views: 25
|
Image140
had a look in the other side and well i dunno if this is noral but theres cut wires broken wires allsorts
Date: 01/07/09
Owner: Flannel HZ Flynn Dew
Views: 29
|
Image136
Date: 01/07/09
Owner: Flannel HZ Flynn Dew
Views: 18
|
|
Image134
check this out this is were i traced the brake light back to, im no sparky but shorly thats not rite
Date: 01/07/09
Owner: Flannel HZ Flynn Dew
Views: 22
|
Image128
decided to c if i could get the side indicators working to, had a look 4 these on the net and theyre like 40 bucks each, think ill just pinch some instead. jkin
Date: 01/07/09
Owner: Flannel HZ Flynn Dew
Views: 26
|
Image126
i think its given up on living "goodbye cruel world"
Date: 01/07/09
Owner: Flannel HZ Flynn Dew
Views: 20
|
|
Image131
the more i stuffd with the wires the worse things got i now have no rear indicators but i got the other brake light working, missoin acomplished...
Date: 01/07/09
Owner: Flannel HZ Flynn Dew
Views: 21
|
Image194
man i choped and replaced that many wires trying to get my rear indicators working that i decided to get another loom from the wreckers
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 6
|
Image196
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 6
|
|
Image198
good idea to when removing them to tie some string onto them so when you pull them out all you have to do is tie it to the new loow and drag it back through otherwise im not sude what i woulda done.
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 8
|
Image200
i used the old multi meter and it said there was current running through it so i was fully baffled as to why i wasnt working, so i made an earth and wala it worked but i still dint click up until some guy on OH told me that they earth when theyre in place by the metal tabs touching the body..... no shit i was tring to fix this for about 2 weeks and not once did i put them back in..... so simple
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 4
|
Image204
anyways hooked all the light up, brought these bad boys off evil bay for 23 delivered also made some gaskets forthem outa an old bike tube, should go the distance
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 7
|
|
Image205
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 7
|
Image206
well every thing works now. happy camper
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 8
|
DSC00603
also went round and cleaned up the earths and plugs in the engine bay any now my front lights dont surge, i never really realised the importance of a good earth, also did the dizzy and coil and now it starts strait up
Date: 23/08/09
Owner: Flannel HZ Flynn Dew
Views: 8
|
