|
The 12 port head after being dipped clean.
Date: 27/11/04
Owner: Mark Berner
Views: 470
|
Bare head, before work started.
Date: 12/06/03
Owner: Mark Berner
Views: 297
|
Standard exhast port before work.
Date: 22/06/03
Owner: Mark Berner
Views: 291
|
Date: 19/03/04
Owner: Mark Berner
Views: 269
|
The extention on the drill was used to get all the way down inside the ports.
Date: 19/03/04
Owner: Mark Berner
Views: 280
|
Date: 19/03/04
Owner: Mark Berner
Views: 253
|
|
from inside the rocker cover, it looks like the oil was never changed.
Date: 18/03/03
Owner: Mark Berner
Views: 321
|
acid dipped to remove all the crud and get it back to bare metal.
Date: 12/06/03
Owner: Mark Berner
Views: 263
|
Now painted "Ford dark blue"
Date: 04/04/04
Owner: Mark Berner
Views: 207
|
|
Polished rocker cover, ready for paint.
Date: 17/03/04
Owner: Mark Berner
Views: 230
|
I got some stainless bolts for the exhaust, nuts for the manifold studs, and the allen key rocker cover bolts.
Date: 17/03/04
Owner: Mark Berner
Views: 246
|
This shows the difference in the "Red" and "Blue/Black" motor heads. To convert a red block to suit a blue
Date: 31/03/04
Owner: Mark Berner
Views: 238
|
|
Big valves, this baby is gunna breath.
Date: 19/03/04
Owner: Mark Berner
Views: 235
|
All finished, at a total cost of $322.
Date: 03/04/04
Owner: Mark Berner
Views: 231
|
The head surface was machined to make sure it is flat.
Date: 03/04/04
Owner: Mark Berner
Views: 213
|
Date: 03/04/04
Owner: Mark Berner
Views: 205
|
Date: 03/04/04
Owner: Mark Berner
Views: 205
|
Close up of double springs
Date: 03/04/04
Owner: Mark Berner
Views: 185
|
|
Exhaust valves have hardened seats so I can run ULP and PULP.
Date: 03/04/04
Owner: Mark Berner
Views: 202
|
Close up of the hardened seat insert.
Date: 03/04/04
Owner: Mark Berner
Views: 228
|
Number 6 exhaust, with port work completed and valve fitted.
Date: 03/04/04
Owner: Mark Berner
Views: 244
|
|
Exhaust valve removed for inspection
Date: 03/04/04
Owner: Mark Berner
Views: 211
|
Inlet, open wide. :)
Date: 03/04/04
Owner: Mark Berner
Views: 199
|
Manifold studs and bolts reinstalled, all in stainless steel.
Date: 03/04/04
Owner: Mark Berner
Views: 252
|
|
Adding colour. (Ford dark blue, high temp engine paint)
Date: 05/04/04
Owner: Mark Berner
Views: 253
|
|
|
