HEI1

This guide is for the installation of a second hand blue motor electronic ignition to a red motor Holden block. Pictured are all the parts you need for the basic job (excluding relay if you wish to use one for power supply). We have the electronic distributor, suitable coil (the standard coil is not suitable, these electronic ignition systems use a high energy coil) and plug leads. For this job I will not be using any new parts apart from the relay to show how easily and cheaply this job can be done. So far these parts were bought for $50 from RedSix at oldholden.com, the relay cost me another $10 from Autobarn. You will also need insulated wire if you are going to wire in a relay but that will be discussed later.