P1020395

This is a look at the wiring harness that goes to the rear tail lights and indicators, the pink wire on the HR goes to the left hand indicator and the purple wire to the right hand. If you follow these wires back you can splice your brown wires into them at the drivers' side of the car either under the dash or at the bottom of the kick panel. If you do this though remember to make sure you use the correct wire from the front to the same on the back, otherwise when your indicators flash the power may travel through the wiring past the alarm and cause the wrong indicator to flash on the back as well.

The installation diagram says to wire the rear cable into the brake lights at the pedal but I wanted the rear indicators to flash not the brake lights when the alarm was armed/disarmed/activated.