|
Meissner Spark Intensifier
I used a clip which I dug out of an old VS lead, a clamp and an old spark plug. While I didn't blow myself up this time, it does need some form of housing. Check for fuel leaks if you try this and don't check for them with a lighter.
No EH engine parts were injured in this exercise.
:)
Date: 19/04/08
Owner: admin
Views: 39
|
Meissner Spark Intensifier_2
roughly 2mm gap
Date: 19/04/08
Owner: admin
Views: 34
|
Meissner Spark Intensifier
roughly 2mm gap
Date: 19/04/08
Owner: admin
Views: 56
|
|
Meissner Spark Intensifier_3
3 and a bit mm gap
I've taken some plugs off so you can see.
This is the widest this spark plug can go. I've got a snapped mower plug and its widest gap is 4 mm and I'm not sure if they make jumbo spark plugs....
Date: 19/04/08
Owner: admin
Views: 33
|
Meissner Spark Intensifier_4
3 and a bit mm gap
Plug the spark plug end of the device into the lead coming from the coil.
The clip attached to the spark plug has a round sleeve which clips onto the center distributer electrode.
The Spark plug is then rigid in place.
While it functions fine for what it is, it needs a housing.
Also make sure you have a spare coil if the one your using blows.
Does it burn fuel more completely is a good question as we are eco friendly here.
Date: 19/04/08
Owner: admin
Views: 38
|
Meissner Spark Intensifier_5
3 and a bit mm gap
Date: 19/04/08
Owner: admin
Views: 26
|
