|
S2010148
test fit first section
Date: 10/11/06
Owner: eddie Hobson
Views: 58
|
S2010150
back section cut ready to be fitted to front section
Date: 10/11/06
Owner: eddie Hobson
Views: 57
|
S2010153
One times right rear door
Date: 10/11/06
Owner: eddie Hobson
Views: 54
|
|
S2010154
Date: 10/11/06
Owner: eddie Hobson
Views: 41
|
S2010161
I need a little more space in the engine compartment for the V8. So i am going to try and use a jetta 3 front bumper and then extend the bonnet and move the grill forward to accomodate a radiator.
Date: 11/11/06
Owner: eddie Hobson
Views: 49
|
S2010170
The bumper is a little to wide for this caddy so i will have to cut it narrower.
Date: 11/11/06
Owner: eddie Hobson
Views: 56
|
|
S2010178
I want to cut the fender to tuck the bumper in as close as possible to look a bit neater
Date: 11/11/06
Owner: eddie Hobson
Views: 51
|
S2010181
Date: 11/11/06
Owner: eddie Hobson
Views: 51
|
S2010182
Date: 11/11/06
Owner: eddie Hobson
Views: 72
|
|
S2010186
The bumper now tucks in nicely but i wiil have to change the the corner bend of the bumper .
Date: 11/11/06
Owner: eddie Hobson
Views: 57
|
S2010191
Cut the corner bend the front in rivet it to hold for now and plastic weld it later.
Date: 11/11/06
Owner: eddie Hobson
Views: 55
|
S2010193
Date: 11/11/06
Owner: eddie Hobson
Views: 82
|
|
S2010253
back together and on its wheels
Date: 06/07/06
Owner: eddie Hobson
Views: 68
|
S2010255
The left rear door inside view made from a piece of a front and back door from a vw citi golf
Date: 06/07/06
Owner: eddie Hobson
Views: 61
|
S2010260
left rear door outside view -still lots of work to do
Date: 06/07/06
Owner: eddie Hobson
Views: 67
|
|
S2010019
Welding the beading grooves closed to smooth off the sides and panel beating the sides
Date: 14/10/06
Owner: eddie Hobson
Views: 42
|
S2010020
Date: 14/10/06
Owner: eddie Hobson
Views: 46
|
S2010084
fitting Audi 500 door handles
Date: 02/11/06
Owner: eddie Hobson
Views: 57
|
|
S2010083
smoothing off the water gutters
Date: 02/11/06
Owner: eddie Hobson
Views: 57
|
S2010138
Water gutters removed and plate welded in to smooth off
Date: 09/11/06
Owner: eddie Hobson
Views: 49
|
S2010141
Date: 09/11/06
Owner: eddie Hobson
Views: 51
|
|
S2010121
lefthand rear primed and ready for block sanding
Date: 06/11/06
Owner: eddie Hobson
Views: 51
|
S2010120
Date: 06/11/06
Owner: eddie Hobson
Views: 56
|
S2010126
All seams were welded and smoothed
Date: 06/11/06
Owner: eddie Hobson
Views: 60
|
|
S2010128
Date: 06/11/06
Owner: eddie Hobson
Views: 53
|
S2010144
Time to make a right hand rear door. One citigolf rear door marked and ready to be cut
Date: 10/11/06
Owner: eddie Hobson
Views: 55
|
S2010146
One vw citigolf front righthand door marked and ready to be cut
Date: 10/11/06
Owner: eddie Hobson
Views: 43
|
|
S2010100
Another preoject . a vw caddy being converted into a 4 door
Date: 15/04/06
Owner: eddie Hobson
Views: 88
|
S2010101
It is also being converted to rear wheel drive
Date: 15/04/06
Owner: eddie Hobson
Views: 111
|
S2010197
My everyday driver 197 vw citi golf blues 1600
Date: 26/06/06
Owner: eddie Hobson
Views: 57
|
|
S2010198
Date: 26/06/06
Owner: eddie Hobson
Views: 64
|
S2010199
Date: 26/06/06
Owner: eddie Hobson
Views: 62
|
S2010261
Date: 05/11/04
Owner: eddie Hobson
Views: 71
|
|
S2010260
Date: 05/11/04
Owner: eddie Hobson
Views: 60
|
S2010259
Susoension was 60mm drop in front and 40mm at rear
Date: 05/11/04
Owner: eddie Hobson
Views: 63
|
S2010200
The wifes car 1995 vw Jetta CSX 1800 .The bumpers and beadings and grilln were white and black befor i sprayed them all white
Date: 26/06/06
Owner: eddie Hobson
Views: 51
|
|
S2010294
The jetta befor painting the bumpers etc
Date: 24/12/03
Owner: eddie Hobson
Views: 69
|
S2010202
My other project .I know its not a holden ,but it is going to be something different.1980 vw caddy converted to a double cab and rear wheel drive and if i can find a good 308 holden motor like the one in my manaro then that will be fitted into the caddy. Well i am going to try .
Date: 28/06/06
Owner: eddie Hobson
Views: 59
|
S2010212
Donor parts from the scrap yard from an old citi golf
Date: 30/06/06
Owner: eddie Hobson
Views: 58
|
|
S2010221
I had to shorten the load bed as well.It would have been to long for daily parking etc
Date: 04/07/06
Owner: eddie Hobson
Views: 52
|
S2010222
Date: 04/07/06
Owner: eddie Hobson
Views: 59
|
S2010241
Shortened Load bed going back on
Date: 04/07/06
Owner: eddie Hobson
Views: 52
|
