Radiator support panel pipework

Copper pipes are heater hoses, upper alloy 180 degree bend is air con. The lower straight copper (now rubber) pipe is the fuel line. The lowest fitting with nothing connected is the other air con fitting

Aircon, heater and fuel hoses

Engine bay side of rad support showing all hoses, air con compreesor and radiator overflow tank

Air con and heater hoses under passenger front gaurd

This is the heater and air con hoses under the passenger side gaurd. The lower hoses are the air con and the upper the heater. The blue pipe at the top carries the main battery cable to the VS commodore fusable link panel in the radiator support

Aircon/heater unit behind dash

Underdash aircon/heater unit mounted in original glovebox are. This unit has a core that contains both aircon coils and heater coils. The original cover that usually has the vents has been removed and a custom fibreglass plenum fabricated. This plenum fee

AC Condensor

VS commodore aircon condensor, twin 12" Davies Craig fans all repainted, replumbed and rewired ready to be installed.

AC Condensor mounted behind grille

Front panel above the grille removed. This is originally rivetted on. It is now removable to allow access to all those items that now live behind the grille. This is better than removing the top support panel as there is less chance of paint damage and be

AC Compressor

Sanden 508 compressor on a custom made mounting bracket. Billet Specialties clutch cover

AC Bracket

Billet aluminium compressor mounting bracket. Took a couple of hours to make but should look good when finished. I made a matching alternator mount also.

100_0257

AC Compressor mounts cleaned up and test fitted.

100_0261

AC Compressor mounts cleaned up and test fitted.

IMGP1703sml

Complete modified under dash A/C and heater ready to mount. The front panel has been removed and a fibreglass plenum fabricated that directs all the air sideway toward the centre of the car. This unit mounts where the original glovebox is.